Condenser Tube Online Cleaning System

The brush cleaning system components include cleaning brushes, brush catching baskets, water flow reversing valves, electric actuators, control panel.

Cleaning brushes: nylon bristles and stainless steel winding wire, the brush can withstand a temperature of 100 degrees Celsius, and can be applied to urban water, groundwater, surface water and salty seawater without corrosion and rust. As a wear part, the service life is 5 years (it is generally recommended to use 3 years for a detailed check whether it needs to be replaced, and the special use environment can be made according to the use of special materials)

Catching basket: made of PE, acid and alkali resistance, organic solvent resistance, good electrical insulation, can be applied to the water temperature environment from -20 to 70 degrees Celsius.

Reversal valve: made according to the standard of pressure volumetric device; SS400 is used for valve body and swing box; S45C is used for shafts and keys; The bearings are made of bronze; Protective slides: Teflon and other rubber seals. The applicable pipe diameter range is from 100-600 mm, can bear the standard water pressure of 1.0Mpa, the nominal flow rate is from 50 cubic meters / hour to 300 cubic meters / hour, and stainless steel can be selected according to the actual operation situation and water quality.

Electric Actuator: It is a heavy-duty industrial design actuator with a micro switch that records the position of the running trajectory and provides power for the commutation in a short time.

Control Panel: Configurable from 15 minutes to 24 hours of cleaning cycles, IP54 rated electrical box also includes: position indication, alarm indication, cycle counter, cable connector, etc. The cleaning unit operates completely independently and does not cause any disturbance to the refrigeration system.