Aluminium Strip and coil Offer required

RFQ Description

ITEM 1: -Strip Size 0.35mm x 30.0mm - Coil Id min 300mm /max coil weight 80kgsRequirements for Pointer : 1 to 2 MT (Chennai). India POINTER SPECIFICATION: Sheet thickness : 0.3+0.07mmRaw material specification:- Al Mg3 - H18, EN AW - 5754 - H18, DIN EN 485-2Sheet finish:- *One side RAL 9005 Coat, *Another side lacquer coat Information about lacquer coat:-1.Glass - level: Satin Finished2.Harness of coat of lacquer : Scratch resistant3.Top side of pointer provided with wash-primer, stove enameled4.Cutting edges: Natural or in the colour of the top side of the pointer5.Resistant to UV- Rays, higher air humidity,oils,atmoshere containing salt and sulphur oxide DIALS SPECIFICATION:ITEM : 2, 3 & 4(ITEM DIFFER IN STRIP SIZES)Requirements for Dials : 1 to 2 MT each sizes (Chennai)MATERIAL GRADE:- (ALCAN WG A5 6S H48) Al Mg 5.0 MnTENSILE STRENGTH:- 330-350 N/ mm 2SHEET THICKNESS:- 0.4±0.03mmFinish:- White polister lacquer RAL 9010STRIP SIZE (TOL ±0.10MM):- 92.00 / 62.00 / 97.50 (1 to 2 MT) 1 to 2 MT ITEM: 5Requirements for Dials : 1 to 2 MT each sizes (Chennai)MATERIAL GRADE:- (ALCAN WG H5 4S H48) Al Mg 4.5 F32TENSILE STRENGTH:- 310-330 N/ mm 2SHEET THICKNESS:- 0.4±0.03mmFinish:- White polister lacquer RAL 9010STRIP SIZE (TOL ±0.10MM):- 97.501 to 2 MT ITEM 6Requirements for Dials : 1 to 2 MT each sizes (Chennai)MATERIAL GRADE:- (ALCAN WG C45 - H44) Al Mn1 Mg0.5TENSILE STRENGTH:- 175-215 N/ mm 2SHEET THICKNESS:- 0.5±0.03mmFinish:- White polister lacquer RAL 9010STRIP SIZE (TOL ±0.10MM):- 150.001 to 2 MT SURFACE FINISH REQUIREMENT:- FREE OF OIL, GREESE AND DUST ON BOTH SIDES, LAQUER - WHITE POLYSTER LAQUER , RAL 9010LAQUER SPEC:- SMOOTH NOTCH AND SCRATCH RESISTANT POLYESTER LAQUER, ROLLED ON AND BURNT IN LIGHT - FAST AND TEMPERATURE RESISTANT UP TO 170 °C, PUNC alluminum strip and coil aluminium coils and sheets